MagLev Rail Add-on Build Instructions
Step 1
- Glue and clamp a2 and a3 as shown to create a foot base.
Step 2
- Glue a4 and and both c4 pieces to the foot base as shown to complete a foot assembly.
Note: Repeat steps 1 and 2 for all of the feet in the set.
Step 3
- Glue and clamp b1 and b2 as shown to create a straight rail top assembly.
Step 4
- Glue pieces a1 and a5 as shown to create support assemblies.
- Glue both support assemblies onto the straight rail top assemblies as shown to complete a straight rail piece.
Step 5
- Insert tabs on the foot assembly into the slots on bottom side of straight rail as shown.
Note: Do Not Use Glue as these pieces are meant to be removable for storage. Repeat steps 3-5 for the other straight rail in the set.
Step 6
- Glue and clamp c1 and c2 as shown to create a curved rail top assembly.
Step 7
- Glue and assemble pieces a1 and a5 as shown to create support assemblies.
- Glue both support assemblies onto the curved rail top assemblies as shown.
- Glue and assemble pieces c3 as shown to complete a curved rail piece.
Step 8
- Insert tabs on the foot assembly into the slots on bottom side of curved rail as shown.
Note: Do Not Use Glue as these pieces are meant to be removable for storage.
Step 9
- Glue and clamp both d1 and both d3 pieces as shown.
Step 10
- Glue both d2 pieces to the bed assembly as shown.
- Then glue both d4 and both d5 pieces to the bed assembly as shown to create the rail car bed assembly.
Step 11
- Glue and clamp d6 as shown to create a maglev assembly.
- Repeat 3 more times.
Step 12
- Glue the four maglev assemblies to the rail car bed assembly as shown.
Step 13
- Glue both pieces d7 to both pieces d8 and glue onto rail car bed assembly as shown to complete the MagLev Rail Car.
- Repeat steps 9-13 for the other MagLev Rail Car in the set.
You’ve Finished The MagLev Rail Add-on
Time to move on to another set!