• NOTE – The Elevations set has pieces spread across multiple sheets in some cases. If you find you’re missing a piece, find it on another sheet.
  • Glue indicated pieces as shown.
  • Make sure that doubled up edges are aligned before drying.
  • These create the PLATFORM TOP pieces.
  • Clamp pieces every 3 inches or so as shown to dry.
  • Assemble support structure as shown.
  • Use a generous bead of glue on edges that contact the assembled PLATFORM TOP pieces.
  • Please see TIPS & TRICKS video for the most effective method of gluing the plugs.
  • Clean any excess glue and allow to dry.
Tips & Tricks
  • Assemble similar to previous panel.
  • On pieces 18 & 20 ensure all scores are crisply and evenly folded.
  • When assembling leg pieces put glue dots in the end of the slots on the larger folded pieces before sliding on the smaller pieces.
  • Check legs for square before allowing to dry.
  • NOTE – There are 2 extra 02 pieces in the set. That is expected.
  • No glue is required.
  • Assemble as indicated.
  • These pieces fit snugly. Be careful when sliding piece 03 on the double plugs to not bend or tear any pieces. Slow and steady wins this race.
  • Glue and assemble as indicated.
  • Please see TIPS & TRICKS video for the most effective method of gluing the plugs.
Tips & Tricks
  • No glue is required.
  • Legs assemble onto feet as indicated.
  • No glue is required.
  • Platforms assemble onto legs & feet as indicated.

  • An assembled platform looks like this diagram.
  • The platforms, legs, extenders, and feet can be combined in may ways.
  • NOTE – There are 2 extra 26 pieces in the set. That is expected.
  • When assembling steps pieces put glue dots in the end of the slots on the side riser pieces before sliding on the smaller tread pieces.
  • Ensure steps side risers are straight up and down before allowing to dry.